For Tyre & Trim Dressing

Apply a small amount onto an applicator pad and spread the product evenly across the surface.

On plastics and trim, apply a thin layer and gently buff residue off using a microfibre cloth.

Always test in an inconspicuous area first.

Avoid using in direct sunlight.

For Non Caustic TFR

Dilute as needed and use through available application method. Can be applied directly through a foaming system on a jet wash or via a snow foam lance bottle.

Recommended dilutions:

• 1:19 (5%) for maintenance washes.
• 1:9 (10%) for general soiling and pre wash use.
• 1:4 (20%) for very thick foam (not practical, for photography)

If applying through a foaming gun on a jet wash, simply use the product as required with your jet wash flow settings and adjust accordingly.

If using with a snow foam lance bottle, start with 50% restriction on chemical, and reduce if more product is required.

Layer the foam on the surface of the vehicle for the coverage required. Allow the foam to dwell for up to 5 minutes. Rinse away using pressure.

Always test in an inconspicuous area first.

Do not allow the product to dry.

Avoid using in direct sunlight.